3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

swap or sell

Old Jul 11, 2011 | 05:28 PM
  #1  
2000dakota4x4's Avatar
2000dakota4x4
Thread Starter
|
Rookie
Joined: Dec 2006
Posts: 53
Likes: 0
From: Rochester, NY
Default swap or sell

I am seeking advice on if I should swap my 05 ram 4.7 into my 2000 Dak 4.7? Yes I know that the tone ring will have to be swapped. The 05 has only 61000 miles and the 2000 has 171000 and a rod knock. The 05 is totaled but lot drives and runs/ran great! Should I just part and sell the 05 to raise funds for a better match for my 2000? The junk yards offered $1800-2000 for the 05. With 61000 the 4.7 alone is worth that!
 
Reply
Old Jul 11, 2011 | 05:57 PM
  #2  
RAM_IT_07's Avatar
RAM_IT_07
Rookie
Joined: May 2011
Posts: 75
Likes: 0
Default

Go for it !!!!!!! You have all the parts you need
 
Reply
Old Jul 11, 2011 | 07:28 PM
  #3  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default

Swap it in, put the good parts in it while its out (cams, intake manifold).
 
Reply
Old Jul 12, 2011 | 03:25 PM
  #4  
2000dakota4x4's Avatar
2000dakota4x4
Thread Starter
|
Rookie
Joined: Dec 2006
Posts: 53
Likes: 0
From: Rochester, NY
Default

Still seeking more input! I guess I didn't understand what a pita it is to swap a tone ring! I may just do a quick and dirty rod bearing to see if I can quiet down the knock.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:53 AM.