3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

replacing some parts.. Any suggestions on shocks

Thread Tools
 
Search this Thread
 
Old Sep 5, 2011 | 07:47 PM
  #1  
nathangfnd's Avatar
nathangfnd
Thread Starter
|
Captain
Joined: Apr 2008
Posts: 732
Likes: 0
From: Grand Forks, ND
Default replacing some parts.. Any suggestions on shocks

SO my 08 has 54000 miles and Im going to start repacing a few things.

I just ordered new wheel bearings, break rotors and pads.

now Need to find a good set of front shocks at a good price, im wanting to lift it 2 inches to fit bigger tires on in a few months when i replace my tires, so a shock that can still fit with a 2 inch lift. but im thinking im doing a strut extention for price reasons.

Also not sure if it matters but the rims im going to order are 18 inch
 
Reply
Old Sep 5, 2011 | 08:23 PM
  #2  
MikeHTally's Avatar
MikeHTally
Champion
Joined: Aug 2007
Posts: 4,702
Likes: 2
From: N. Florida
Default

A two-inch lift won't require new shocks. I finally replaced my OEMs last spring at 110K. The Monroe Reflex I put on have done well so far.
 
Reply
Old Sep 6, 2011 | 12:01 AM
  #3  
Brandon Anderson's Avatar
Brandon Anderson
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

4x4 or 4x2? I assume 4x4 since you mentioned struts. If you're only lifting 2", you should check out the Bilstein adjustable struts. They have 0-2" of lift, so pretty much exactly what you're looking for. If 4x2, you won't need new shocks for 2" of lift.
 
Reply
Old Sep 6, 2011 | 10:28 PM
  #4  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

I got my Bilsteins at www.eshocks.com for a great price. High pressure gas shocks that help keep the tires planted to the ground.
 
Reply




All times are GMT -4. The time now is 04:23 PM.