Well, I did the mod that others talked about in this thread:
https://dodgeforum.com/m_443200/tm.htm

I loved the look. I dragged my feet on it for about 6 or so months. And I finally decided to buy the lights and do it. I put the lights in.. centered them best I could.. I put about 21 inches in between the lights. I know it's an odd number.. but I had to make sure I cleared some of the other equipment already on the truck. I ran the lines thru the firewall and put some silocone over the hole in the rubber boots I went thru. I was going to use a switch that I had bought off eBay but I didn't have a 3/4" drill bit. So I used the switch the kit came with and put it in the center counsle on the ceiling. I think it turned out nice. Let me know what you think.

(because the picture files are kinda big.. I'm going to add a couple of posts)



[IMG]local://upfiles/27429/178BAE2E8F9646F2AA8AECC0DA771DBF.jpg[/IMG]

[IMG]local://upfiles/27429/F7C7FC11DADD4EB199593D99DA64F2F5.jpg[/IMG]

 

kinda looks like the new mustang gt's there.......i really like it........

 

Here are pics of the 2 lights and locations..



[IMG]local://upfiles/27429/B4BBE8F53EC7421EBFE59FF7C9BDC8B4.jpg[/IMG]

[IMG]local://upfiles/27429/B702BD5CF94746BBA8D02B0CDDC4E0B8.jpg[/IMG]

 

And the switch location...

[IMG]local://upfiles/27429/A22A53264DCA4E7B8E2228070A48182F.jpg[/IMG]

 

Good install, i like how you can see the smiley face covers behind the grill haha

 

I plan on adding some lights to my Hemi if I ever get my Jeep sold.

 

i like it minus the smiley faces

 

i like it

 

yah i like it cept for the smiley covers...that just dont do it for me

 

How do you have the lights mounted? Specifically the hardware/drill points.