3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

6" lift installed-updated

Thread Tools
 
Search this Thread
 
  #31  
Old 09-12-2007 | 04:36 PM
Roadglide's Avatar
Roadglide
Registered User
Joined: Feb 2007
Posts: 34
Likes: 0
From:
Default RE: 6" lift installed-updated

Nice truck pre-runner, i opted for the coilovers in the front, yes, close to a grand more,.......lift them all i say, 2 or 4 wheel.
 
  #32  
Old 09-12-2007 | 09:41 PM
prerunner's Avatar
prerunner
Thread Starter
|
Captain
Joined: Jun 2004
Posts: 564
Likes: 0
Default RE: 6" lift installed-updated

going coil overs tomorrow. 1100.00 installed, but it also includes the upgraded rear shocks!!!!!!!!
 
  #33  
Old 09-14-2007 | 06:08 PM
Roadglide's Avatar
Roadglide
Registered User
Joined: Feb 2007
Posts: 34
Likes: 0
From:
Default RE: 6" lift installed-updated

Yes,...I failed to mention that, the 6 way adjustable mx-6 Robby Gordon signature series,lol.


So far i have left the factory pre-set, i might diddle a little bit to see the difference, it bounces a little on rough roads, but since i drive a no suspension garbage truck all day, a little bounce dont mean nothing to me.

Enjoy the lift, later.
 
  #34  
Old 09-14-2007 | 07:44 PM
chopperzen's Avatar
chopperzen
Veteran
Joined: Jul 2006
Posts: 400
Likes: 1
From: Flowood, MS
Default RE: 6" lift installed-updated

Looks good man! I really like those rims too!
 
  #35  
Old 09-16-2007 | 01:34 AM
prerunner's Avatar
prerunner
Thread Starter
|
Captain
Joined: Jun 2004
Posts: 564
Likes: 0
Default RE: 6" lift installed-updated

Got the coil overs and rear shocks installed on thursday. I put the mx-6's on the lowest setting at the moment. Had to take her back on friday to have the coil overs adjusted. She settled about an inch after driving for a day!!!!!! Looks good tho
 



Quick Reply: 6" lift installed-updated



All times are GMT -4. The time now is 05:16 AM.