When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I was looking at a lift the other day and it said will fit 33's My stock 275/60/20's are 33" the lift is 2 1/2 front 1 1/2 or 2 in the rear I have an 07 QC Laramie 4X4 what to you guys think about this lift fitting 35's
The math works--you'll technically gain a half inch of clearance if your measurements are right on.
Also, IMHO you don't have much to worry about in the rear. They don't turn, and those wheel wells are HUGE!
yea the only time you have to worry about the rear is big tires and a big load.... other than that you should be fine in the rear... in the front you might have slight rub at full lock other than that pretty good...