3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Ok, Im going to ask.....

Thread Tools
 
Search this Thread
 
Old Jan 29, 2008 | 01:18 PM
  #1  
beerformeplz's Avatar
beerformeplz
Thread Starter
|
Rookie
Joined: Jul 2007
Posts: 58
Likes: 0
From:
Default Ok, Im going to ask.....

Ive tried the search feature and it didnt return what I was looking for so here goes.

I have an 07 Ram 1500 QC 4x4 with the front leveling kit and I have some tax refund money burning a whole in my pocket so its time for rims and tires. I was looking at this http://cgi.ebay.com/ebaymotors/17-BL...QQcmdZViewItembut im not sure on which tire size will fit along with which off set for the rim. I think I read that 35s will fit with the leveling kit but after talking to the people at the company selling them they said there no way 35s will fit.

Any help would be awsome.
 
Reply
Old Jan 29, 2008 | 01:30 PM
  #2  
kregier's Avatar
kregier
Veteran
Joined: Dec 2006
Posts: 313
Likes: 0
Default RE: Ok, Im going to ask.....

Someone else should chime in eventually, but I'm pretty sure 35s will fit but you'll probably get some rubbing if you crank the wheel completely in either direction and they'll probably rub if you hit a bump that would normally bottom out your suspenstion.
 
Reply
Old Feb 9, 2008 | 07:45 PM
  #3  
beerformeplz's Avatar
beerformeplz
Thread Starter
|
Rookie
Joined: Jul 2007
Posts: 58
Likes: 0
From:
Default RE: Ok, Im going to ask.....

no more advise?
 
Reply
Old Feb 9, 2008 | 07:57 PM
  #4  
TANKZ400's Avatar
TANKZ400
All Star
Joined: Jun 2007
Posts: 998
Likes: 0
From: FREDNECK, MD
Default RE: Ok, Im going to ask.....

35 inch tires will fit with a leveling kit
 
Reply
Old Feb 9, 2008 | 08:46 PM
  #5  
mmstar23's Avatar
mmstar23
Champion
Joined: Jan 2008
Posts: 2,899
Likes: 0
Default RE: Ok, Im going to ask.....

as far as my knowledge is, and what ive learned, 35 should fit. you may have a little rub, but if you do, you can crank your torsion bar to give you a the extra clearance you need
 
Reply




All times are GMT -4. The time now is 09:40 PM.