Gauge Pod on A Pillar
#1
#3
#4
#6
RE: Gauge Pod on A Pillar
I'm looking at getting the Interceptor AeroForce gauge. It basically scans through every parameter that your computer can read, and put it through the display. There is no part number listed for a Ram on their website, but they have it for a few other Dodge products. I sent the owner an e-mail seeing if he has one for us. I'm hoping he does, as I've read a few posts where the p/n's not listed and he's had them, or had them in development.
It's a gauge similar to teh DashHawk (which is my fall back), but fits in the gauge pillars like standard AutoMeter guages.
Thanks for the info guys, and I'll let you know when I hear back from him.
Chris
It's a gauge similar to teh DashHawk (which is my fall back), but fits in the gauge pillars like standard AutoMeter guages.
Thanks for the info guys, and I'll let you know when I hear back from him.
Chris
#7
Trending Topics
#10
RE: Gauge Pod on A Pillar
There are a billion places to buy pillar pods. Most of the CTD guys stick their gauges there; we normally run 2 or 3 though. Depending on the shape of the gauge you might be doing some searching.
Here is a whole **** load of different gauge mounts:
http://www.genosgarage.com/products.asp?dept=62
Here is a whole **** load of different gauge mounts:
http://www.genosgarage.com/products.asp?dept=62