So....I tried it out on the front end of my 06 1500 4x4...with a 2.5" leveling kit....and guess what...on stock rims....NO RUBBING AT ALL.....and NO SPACERS...barely clears....so im going to get a 1/4" spacer just for that extra room....but with no spacers with it turned all the way both ways...backing up and forward...NO RUBBING!!!!! pics to look at too....so here's to u all that thought it wouldnt work....now all I have left to do is put the 3" body lift on it....so when that gets done I will have ALL the tires mounted on it....with new pics...this was just to see if it was gonna rub....so...here's the pics.....

[IMG]local://upfiles/84191/9442CE52A85C4BB8B68BDDE9E1010DC0.jpg[/IMG]

[IMG]local://upfiles/84191/2D2D065493FB4032BA10CA0417BC932A.jpg[/IMG]

[IMG]local://upfiles/84191/017CCED781604741BB35CAAD7F5C6963.jpg[/IMG]

[IMG]local://upfiles/84191/994F51F31F98476DBA9F5D4679BBEDA1.jpg[/IMG]

 

WOW that looks bad *** man!!! Love it

 

That looks very nice.It will look alot better with the body lift Try going over a bump with that.

 

Looks bad ***, and yeah a body lift would just set that truck off.

 

Have you hit any bumps at any sort of speed with those bad boys yet??? Or hit a bump while turning? just curious..

 

I know that when I put my 315's on I had about a 1/2" clearance on the front when cranked inward. I thought I was going to have to cut the outside under clip down but didn't.... I thought for sure if I hit a big bump they would hit but as it turns out they don't and I'm way closer on the front mud flaps than anything.

 

Looks sweet

 

bad *** truck dude!