does the plastic storage container on the inside lift out? if so you might take it out and then fabric. Once done re-insert the container to make it appear nice (i.e. not see the fabric edges.). I am going to call around my salvage yard and see if they have any trucks with the center done. If not, I am going to be following close behind on this mod too!

 

does the plastic storage container on the inside lift out? if so you might take it out and then fabric. Once done re-insert the container to make it appear nice (i.e. not see the fabric edges.). I am going to call around my salvage yard and see if they have any trucks with the center done. If not, I am going to be following close behind on this mod too!

 

no...it's one piece. ugh.

 

i noticed when they assembled this in factory, they used staples in some areas of the originaly vinyl...that went straight into the plastic. and...i have a "heavy duty" staple gun...and yea, sstaples bounce off this **** like nobody's business. damnit. next idea.

 

heavy duty double sided tape? heat up the plastic a little bit to soften (not melt) it for staples?

 

well, the staples are only seeming to not go in on that first spot i tried. the thing is...when you open it, i'm gonna see staples going all up and down the sides (whcih i wanted to avoid...but i gotta keep this stuff stretched..)...

i think for the top half of it, i'm gonna sew up a sleeve for it...cause it is a more symetrical shape than the bottom.

god, if it wasnt' so ugly, i'd put it back in truck as black plack plastic, but that foam **** is ugly, and important

 

gosh, i should just build a whole console from scratch and bolt it in...

then make millions selling it to you guys.

 

i am gonna kill someone

 

lol, im not the cheater!!! the dealer is! haha. my truck came stock with it, so i guess i lucked out, huh? lol. having fun doing this dude? how far along are you? PICS!!!!!!!!!!

 

i'll give you one pic...that's it.

but like i said, i'll make a HUGE write-up...