how hard is it to install the rumble be like stripes?
i dont want the fumblebee one but it looks kinda like that.

just clean the area and apply, that simple?
does a hand wax over it ruin it?

 

Haven't done this to my RAM but I've added decals to my Suzuki GSXR. I just cleaned it very well making sure to remove any old wax then apply the decal. I've added wax over the decals several times without harming the decals. The only thing I've noticed is that the wax can leave a white residue along the edge of the decal - easy enough to clean off though.

 

how do you remove the old wax first?

 

does redram have a DIY walkthrough of this?

 

soap, claying, wax removers... google "auto wax removers."

 

just stick it on the truck.

use soapy water to make sure it doesn't stick until you want it to. then squeegee soapy water out from under it.

 

I have done it twice on my 02 Ram and going to be twice on my 07. Its all about patience. Get the old wax off with dawn dish soap. Also use soapy water for the install so the decal will slideand remove air bubbles. Not too much or it will be to slippery and drive you nuts.

 

Here is a link to what you need.

https://dodgeforum.com/m_870447/tm.htm