Alright so ive been trying to find a place online to get some pricing quotes on changing them out, ive seen alot of threads talkin about them but none actually saying where u can buy them. So anyone got any ideas? Thanks
Veteran
http://www.summitracing.com
http://www.rearendparts.com/
Installation will probably be more expensive than the parts. I'm lucky and have a buddy who can install them for a 30 pack of Bud.
http://www.rearendparts.com/
Installation will probably be more expensive than the parts. I'm lucky and have a buddy who can install them for a 30 pack of Bud.
Administrator
Best Prices (and by far the best customer service) you'll find is at one of the two following places:
http://www.airram.com/parts.php?categoryid=751
http://www.moesperformance.com/
As far as the install, find a place near you with a lot of experience doing gears...
http://www.airram.com/parts.php?categoryid=751
http://www.moesperformance.com/
As far as the install, find a place near you with a lot of experience doing gears...
Registered User
try jegs or summit i have an 02 4wd and was looking to change rearend they, sell the matching front and rear sets fairly inexpensively
Champion
if i order the gears....
http://www.airram.com/product.php?ca...;productid=170
which i would get the 4.56, would i need an installation kit as well. if yes, would this be it?
http://www.airram.com/product.php?ca...;productid=171
http://www.airram.com/product.php?ca...;productid=170
which i would get the 4.56, would i need an installation kit as well. if yes, would this be it?
http://www.airram.com/product.php?ca...;productid=171
Registered User
I would get the install kit, and yes that is the kit that you need.
I meen think about it you are going to put new gears in so you should while you are in there put new bearings in to. Then you will have a completely new rear, and I would also replace both universal joints.
I just install my set of 4.56 gears 3 weeks ago with an install and just love them.
I meen think about it you are going to put new gears in so you should while you are in there put new bearings in to. Then you will have a completely new rear, and I would also replace both universal joints.
I just install my set of 4.56 gears 3 weeks ago with an install and just love them.
V6 Ram Moderator
get gears you like...read into it. i mean, you're gonna pay like ~$350 for installation + gear cost...and if you get a posi, another $400 or so. i paid 1100 for my 4.56 gears w/ a posi. since i was spending that much, i figured i might as well pay another 50-60 bucks for better than bottom-tier gears. the guy told me to use "u.s. gear" because they make tons of chrysler's oem gear. the sunvabitch was liek 290 though....were as the motives are like 150 or something off of airram's site. and on top of that, they're located here in chicago...which was a plus in my book.
Administrator
Rule of thumb on the install kit is under 30k, you can get away without it, over 30k on your truck then you need it...
V6 Ram Moderator
^^ that's what my guy told me. he's like, "i don't know if we needed to change the seals and stuff...but i always do."
Champion
im looking to spend the least amount of money possible here. so im looking at the 4,56 motives from airram, then the installation kit. and then to install it...so what am i looking at? $700 total?