putmy poor man's exhaust on tonight
#11
#12
#13
Its all 3
#16
#17
#18
#19
#20
they are not split, they are swelled, or streched so they slide right on.
its like they are 3.1 inch, so they slide on a 3.0 pipe.
Remember, I did have a 2 ft peice of tailpipe to fill in between the new muffler and pipe from the cat. converter, and i DID have to trim it to fit (shortened it) I originally had a 18 inch pipe that wasnt long enough.
Make sure you have something to cut down the extra pipe if you need, but make sure its long enough to reach.
Plus you will need it to get the OLD muffler off
its like they are 3.1 inch, so they slide on a 3.0 pipe.
Remember, I did have a 2 ft peice of tailpipe to fill in between the new muffler and pipe from the cat. converter, and i DID have to trim it to fit (shortened it) I originally had a 18 inch pipe that wasnt long enough.
Make sure you have something to cut down the extra pipe if you need, but make sure its long enough to reach.
Plus you will need it to get the OLD muffler off
Last edited by SmokeySportRam; 11-04-2008 at 09:23 PM.