EDIT - MORE NEW PICS AT THE BOTTUM OF THIS POST








Well, I finally got some free time, so I threw them on. I know this isnt a new mod, just wanted to share.

Just did this today at noon, so I dont even know what they look like at night yet, I will try to take some night shots later if the wind dies down.

In the pics it was blowing like 15-20 MPH with snow, and the sun is shining, so the pics suck. I will take more soon.

Basically they are high enough they woulnt catch anything anything and low enough to get light out under the bumper, I used a 4 inch hose clamp and clamped them to my hitch that has a tube design, ran the wire along with the factory harness on the drivers side frame rail, up to a custom switch that is mounted just below the gauges next to the headlight switch.

And my hands were all dirty after all the wire running and everything, it got the dash dirty, that usually doesnt happen.













Ok these pics were taken at dusk, it wasnt light, and it wasnt dark, so....

This one was with the parking lights and LED reverse lights in stock tail light housing


This was with the parking lights and only the new reverse fog lights (the background looks so much darker because these lights are so much brighter they are confusing the camera)


This is from the back with the parking lights, and LED reverse and foglight reverse on

 

definitely looks helpful, ive been wanting to stick a pair on mine too, cant see crap backing up at night and they'd help out big time.

 

Looks good man. I'm tired of winter already. Today is the first day it's been above zero since Dec 12

 

I have recon back up lights on my truck. They come on when I put the truck in reverse and I have a switch on the dash. They are really bright. What kind of lights did you use?

 

they are cheapo $15 lights from the local parts store

 

i love where you put that switch!

 

more pics in the bottum of the 1st post

 

nice i think i see my next mod. can you switch them on when the truck if turned off? like if i needed to load something at dark but didnt want to start the truck

 

it all depends on where you voltage to the switch is coming from.

Right now mines if direct from the battery (with an inline fuse) so yes they can be turned on with the key off.

I am debating something in the Run position so that if they are left on they can not drain the battery.

 

did that switch come with the kit if so what kit did you get