When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I did once when the cable got pulled out during the middle of an update and I couldn't get it to reconnect. A call to customer support straightened it out for me.
I have no experience with superchips but isn't it best to shift a few hundred rpms below redline? Anyway Snide, I like your avatar pic
The best way to set shift points is to get on a Dyno and see where the graph starts to fall. You would then set your shift points based off of that. Redline isn't a power gauge, but more of an explosion gauge...lol
Just because a vehicle redlines at 6k doesn't mean it make power up to that. It could only have power up until 5k and drop off after that.
I just checked DiabloSport's setting for shift points. Here ya go: Shift Points
Raise shift points by a predefined setting, 5.7L's (1-2 5800rpm, 2-3 6000rpm, 3-4 6000rpm), 6.1L's (1-2 6400rpm, 2-3 6400rpm, 3-4 6400rpm).(N/A on Jeep)
01-03-2009 | 01:43 PM
