3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

where to start?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-03-2009 | 06:11 PM
0715003.6L's Avatar
0715003.6L
Thread Starter
|
Registered User
Joined: Jan 2009
Posts: 2
Likes: 0
Default where to start?

There wasn't much info on the V6 around so I was wondering about possible swaps but maintaining a manual trans, or maybe some form of forced induction for it. Any guidance would be helpful for possibilities on what to do with it. Thanks.

Kenny
 
  #2  
Old 01-03-2009 | 06:19 PM
lxman1's Avatar
lxman1
Site Moderator
Joined: May 2008
Posts: 9,652
Likes: 22
From: Louisville, Ky
Default

Did you look here ? https://dodgeforum.com/forum/v6-specific-topics-81/

Welcome to the forum
 
  #3  
Old 01-03-2009 | 06:22 PM
0715003.6L's Avatar
0715003.6L
Thread Starter
|
Registered User
Joined: Jan 2009
Posts: 2
Likes: 0
Default

yeah, but there is only one post and it was no help what so ever.
 
  #4  
Old 01-03-2009 | 10:52 PM
froto'sride's Avatar
froto'sride
Professional
Joined: Sep 2008
Posts: 198
Likes: 0
From: Dyersburg, Tn
Default

So here is the deal the 3.6l virtually has the same bellhousing as the 4.7l and i would venture to say that they weren't much diffrent than the hemi reson in being is that it is cheaper for chrysler ?to up grade or manufacture tha same thing with the same common specs as everything else. Worst case you will have to buy a diffrent bellhousing but will be able to keep tha trany. Do you know the type of trany..tell me and I will research what it is used in and compatable with.
 



Quick Reply: where to start?



All times are GMT -4. The time now is 07:00 PM.