When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
put my leveling lift on today, need bigger tires now *pics*
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
if iam correct you can put 35 on the factory 17's with out spacers i have the 325/60/20 and needed spacers but i think because they are equal to 35/13/20 but wenever i put my 17's with my 35/12.50.17 they fit find no spacer and i have a 2008
I might just go to discount tire and see if they fit on these without spacers. There isn't much room between the tire and the steering knuckle. Maybe just some 33's on it.
talon6, how close do the tires get to the front bumber when you crank the wheel in a turn? I was told that 35's would be too tall with just a level kit and would rub...
i have done a little off roading and have only got a little rub on the fender well. never on the bumper.sometimes if i have the wheel cut, and hit a bump at the same time i am turning, it will rub a little too. nothing very bad though. i think that if a person would take a torch and heat up the wheel liner you would have no problems at all. i am planning on a lift real soon so the little bit of rub once in awhile doesnt bother me. if i wasnt lifting, i would be getting longer shocks and trying to "massage" the liners.
I might just go to discount tire and see if they fit on these without spacers. There isn't much room between the tire and the steering knuckle. Maybe just some 33's on it.
33's is what come stock on the factory 20 inch rims. thats what i took off.