When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I didn't know that the RC had such a bend in the pipe going into the muffler. How much length do you have on that straight piece between the muffler and the y-pipe? Maybe you could fit it in there, the dump pipe only needs around a foot.
Looking towards the front of the truck right where the hanger is:
The length of the straight piece after the bends is maybe 8-10" give or take. Im figuring that is where it is going to have to go but trying to wedge it in there is gonna be a b*tch
He he he.............here's my train horn video and several runs with my e-cutout open for ya.
If this doesn't make anyones mind up about getting either of those two mods..........I don't know what will.
Looking towards the front of the truck right where the hanger is:
The length of the straight piece after the bends is maybe 8-10" give or take. Im figuring that is where it is going to have to go but trying to wedge it in there is gonna be a b*tch
Nope after the muffler there is maybe 3" or so and then the system bends to go over the rear axel, then does all the bends to get around the spare tire and out the sides.
Nope after the muffler there is maybe 3" or so and then the system bends to go over the rear axel, then does all the bends to get around the spare tire and out the sides.