DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help on code(cam/crank position sen.)

   
Old May 9, 2009 | 11:02 AM
Share
  #1  
ice-burg-slimm's Avatar
ice-burg-slimm
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 7
Likes: 0
Default Help on code(cam/crank position sen.)
I was getting the code on both sensors on my 03 ram,the truck had stopped running because of them.I changed the sensors out and the chech engine light whent away,but the truck still wont run.If you fire it up it seems like it's having a hard time staying at idle,it sounds like not all cylinders are firing. Help please.
 
Reply
0
Old May 9, 2009 | 12:01 PM
Share
  #2  
Riccs22's Avatar
Riccs22
Rookie
Joined: Oct 2008
Posts: 53
Likes: 0
From: NJ
Default
what were the codes
 
Reply
0
Old May 9, 2009 | 01:38 PM
Share
  #3  
ice-burg-slimm's Avatar
ice-burg-slimm
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 7
Likes: 0
Default
Can't remember the actual code number,but it was for the cam/crank position sensor.
 
Reply
0
Old May 10, 2009 | 12:00 PM
Share
  #4  
ice-burg-slimm's Avatar
ice-burg-slimm
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 7
Likes: 0
Default
can any one help?
 
Reply
0
Old May 10, 2009 | 12:29 PM
Share
  #5  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default
Try unhooking the battery for about 1/2hr to reset the PCM?
 
Reply
0
Old May 10, 2009 | 02:13 PM
Share
  #6  
ice-burg-slimm's Avatar
ice-burg-slimm
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 7
Likes: 0
Default
Originally Posted by lxman1
Try unhooking the battery for about 1/2hr to reset the PCM?
That didn't work it sounds as if it's missing.
 
Reply
0
Old May 11, 2009 | 09:02 PM
Share
  #7  
ice-burg-slimm's Avatar
ice-burg-slimm
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 7
Likes: 0
Default
Is there any more suggestions?
 
Reply
0
Back to Subforum
3rd Gen Ram Tech
View Next Unread
Hey look!!! I painted my Door Handles Too!!!


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 02:17 PM.