When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
do u happen to remember what they had to do to make them fit? because im going to be getting my drop next week and trying to find the tires to fit my 22" srt 10 rims that my buddy is going to get me and do u know if they had to do anything with the camber up front to have the alignment done?
thanks man.. and they fit fine just at full turn they rub only alittle bit.. but mine dont anymore i didnt have mine aligned until after the medal had already bent.. but it will help it
on the a arm.. it doesnt do it anymore.. it did it for like the first week or so at full turn then stoped. but it also wasnt aligned and my front tires were really cambered.. so with an alignment you shouldnt have this issue.
oh and heres the tires i got.. i love them.. nitto 420s
on the a arm.. it doesnt do it anymore.. it did it for like the first week or so at full turn then stoped. but it also wasnt aligned and my front tires were really cambered.. so with an alignment you shouldnt have this issue.
oh and heres the tires i got.. i love them.. nitto 420s
Mine would touch the fendwell lip on full compression until the Camber was adjusted. Looks good.....
hey red truck, i see you your sig says you have a 2/4.5 drop. thats what i have but it looks like your trucks a little lower. what size tires are you runnin? you might just have bigger tires than me and that would make the fender gap look smaller. i have 295/45/20 tires.