When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys I'm new to this forum first post but I'm looking for a way to lower my truck 2in the front 4 in the back for around $250-$300 I have a stock 2003 quad cab 3.7L . thanks in advance !
380 is the lowest i seen kits, McGaughys econo 2/4.5 is all over for that price.
i have a 3/5 drop on my truck. the front is coil springs and the back is a flip kit.
i was wondering what the best front and rear shocks to buy were so that my ride has better quality. Please help me with this problem.
are those 20" or 22" slides? I too am looking for new shocks again, i just put kyb on all 4 and i dont care for them. let alone i hate seeing the shock extenders from behind, shorter shocks would be great...
Theyre 22s. Yea i know what you mean. I just want my ride to be better. I was thinking about getting the belltech shocks that are made for lowered vehicles. But idk what length to get.
what size tire do you run with them, im looking at some 22s and dont know what size to get, im running a 275/55/20 right now and they scrub the inner fenderwell liners on some bumps...some say the belltechs suck, some like em, same with toxic drop shocks...
Hey guys I'm new to this forum first post but I'm looking for a way to lower my truck 2in the front 4 in the back for around $250-$300 I have a stock 2003 quad cab 3.7L . thanks in advance !
the mcgauhgys is nice for the amount but the wear on my tires is killer
I have an 04 Ram 1500 2wd. My rear shocks r blown in the back and I just bought new ones but I am now worried about if they are correct or not. My buddy at work said that they make shocks for lowered trucks as well. So should I have not bought the normal shocks? and got the ones for lowered trucks?
Ok so I bought my truck the way it is. It is already lowered. I have no idea how they lowered it or what they used. I came from imports and just dont know trucks very well. The front is 32 1/2" from ground to fender well. Rear is 33 3/4". I cant find the stock height but I am hoping it is only 2-4" drop not the 5" drop. I see Belltech Nitro Drop 2's have them for both. I guess I am just going to get the 2-4" drop and hope for the best.
What do you guys think? will I be ok with these shocks? having no idea of how it is lowered