When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Ill go thru tires like crazy if I cut the springs been there done that...I didn't say anything bout shocks I said I'd get drop spindles that way I can keep it close to factory ride quality and flip the rear it's all kinda relevant ....I know what I'm doing to a point just which way I wanted to go with this truck....
Curious?, maybe jealous....
With nothing constructive to contribute?
Well, if it ain't your thing then shut up and move off the thread no need for a$$hole remarks..
I was just poking fun. If you look at half my post they are about what you see here. And if you'll stick around very long at all you'll see many more like it. Don't get your panties in a wad about someone over the internet making fun of your vehicle. Its super mature.
I was just poking fun. If you look at half my post they are about what you see here. And if you'll stick around very long at all you'll see many more like it. Don't get your panties in a wad about someone over the internet making fun of your vehicle. Its super mature.
Ya, me too, just having a little fun. But actually I suspect you are being way too modest about only half of your posts being troll material. But hey, I understand, you are just being funny. However, too keep this thread on track I do think you are in the right section to get some help with that lift problem. Once it is removed I'm sure bits and pieces can be sold. Now with some help from your new friends you will be able to get that baby down where you won't have to worry about panties getting wadded up or even butt burn from climbing in and out of that bad boy. Don't give up, there's help available.
guys this isn't a my motor is bigger than yours thread...its a my truck is lower than yours thread...and that my boys is true OE just wants be low.low.low....right brotha...your a street scraper at heart you just need to admit it....
2008 1500 ram with 5.7 l. Bone stock w 20" factory wheels and tow package. SLT.
The rear is slightly higher than the front, as all of you know.
Am I save in assuming this item will help me level it out somewhat ?
yeah but to me they dont look like 2" drop shackles...these do....http://moesperformance.com/index.php...Path=1_26_1172 go mcgaughys they give you a closer to 2" drop...over competitors...i have djm and no overload leaf so you can reference what your truck will look like....dont get me wrong thats a good price but mine look like mcgaughys and mine are djm....MIKE GET AT ME MAN...HELL EVEN KEN IF YOU CAN...