Hi guy's I'm going to put in a brake controller and was wondering where you have installed it, any pictures of where you put it in?

Thanks Regert

 

bottom right on that panel that kind of just pulls off after you take out those two screws at your feet. Real easy to reach, real easy to wire in, and real easy to use. just take that panel off and square it up with the panel all the way towards the bottom to make it look clean. I dont have any pictures of mine, but its a great place to do it.

 

+1 thats where i have mine, down near your right knee. looks, good, and stays out of the way.

 

any of you have a Pic by chance?

 

I have the Prodigy mounted in the little space under the HVAC controls. I have been meening to put some velcro in there to help hold it in place, but I've been using it as is for 2 years now. It fits nice and tight the way it is just pushed in there. If you have the trailer tow package on youtr truck there is a wire kit available at most camper/trailer sales places for about 12-15 dollars. Plugs right in on the floor, then into the brake controller.

 

Here is where I mounted my Prodigy.

 

Nice install, whats the red button for?

 

It was on there when I got the truck...it has something to do with the piece of crap remote start.

 

How bout this. I love it. Out of the way and easy to reach and read. No sun glare. The only thing was placement. it is very close to the steering wheel so be sure you've got room to turn your steering wheel around completely w/out hitting.
Click on the pic to make it full screen.

 

nice pic's thanks for some ideas just need to do some reaserch on what unit to get, need one before the snow flies for the sled trailer.