My 2006 RAM SLT has both a cigarette lighter and a separate accessory 12V outlet. The accessory outlet works (provides 12 volts) when I plug in an accessory; however, even though the cigarette lighter works (the element heats up when pushed in), when I try plugging in an accessory in the cigarette outlet the accessory doesn't work (no power). Any thoughts on why this might not work for accessories?

Thanks

 

to different sockets look inside of the two the sig is only for the sig . sorry thats the way it is .

 

I wonder why they made it that way? It used to be in cars/trucks the cigarette lighter receptacle could be used as an accessory outlet.

 

When i changed to a double din radio i also changed out the sig lighter for another power port.

 

I like the double power port.

 

Looks good.

 

"Turn the ignition switch to the 'Run' position. Check for batt voltage at the fused B (+) fuse in the integrated pwr module, if ok, then ck the back of the cigar lighter outlet shell center tap for batt voltage." Main step, turn the ign switch on.

They hooked it that way so if the operator used the port for an accessory outlet, say a coffee cup warmer, and if forgotten, it would not set all day toasting.

 

Thanks, folks.

 

Both the ones in my truck work for anything. Power is power. One is switched, one isn't.

 

likewise