3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Tie-rod at pitman arm

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2009 | 12:40 PM
oilfieldram's Avatar
oilfieldram
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 8
Likes: 0
Post Tie-rod at pitman arm

I am having a hard time finding a tie-rod end for the pitman arm on my 2007 dodge 1500 mega-cab. I know that is all 2500 underneath but nobody can find this tie-rod end. If you know where to find one, please let me know. Thanks.
 
  #2  
Old 10-05-2009 | 04:59 PM
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 21
From: South GA
Default

have you tried www.rockauto.com ?
 
  #3  
Old 10-06-2009 | 11:25 AM
oilfieldram's Avatar
oilfieldram
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 8
Likes: 0
Default

Thanks, I'll check it out.
 
  #4  
Old 10-06-2009 | 11:39 AM
oilfieldram's Avatar
oilfieldram
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 8
Likes: 0
Default

Thanks. I found one on there for a 2500, but I don't know if it will work for the mega-cab 1500. It should because the 1500 mega-cabs are all 2500 underneath, right?
 
  #5  
Old 10-06-2009 | 01:49 PM
ramhunter9's Avatar
ramhunter9
Banned
Joined: Jun 2008
Posts: 5,343
Likes: 0
Default

yes your 1500 is a 2500 only difference is the front springs are not as big and you have one less leaf in the rear.
topgunzcustomes.com has all you need for it and is verry cheep
 
  #6  
Old 10-06-2009 | 04:26 PM
oilfieldram's Avatar
oilfieldram
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 8
Likes: 0
Default

Thanks for the help.
 




All times are GMT -4. The time now is 05:49 PM.