Just for the haters!! 24s on 40s
#41
12-01-2009 | 10:20 AM
Thread Starter
|
Rookie
Joined: Dec 2005
Posts: 88
Likes: 0
From: SW Louisiana
haha yea mostly the junk z71s around here are the ones that break crap constantly and i get to pull them out..and thats the main reason i havent added a winch/bumper combo is bc of the body lift and the fact that i never needed one for myself..but with these rims im gonna stick to offroadin with my four wheelers
#43
12-01-2009 | 10:46 AM
Thread Starter
|
Rookie
Joined: Dec 2005
Posts: 88
Likes: 0
From: SW Louisiana
#45
12-01-2009 | 11:29 AM
Hall Of Fame
Joined: Mar 2009
Posts: 19,168
Likes: 21
From: South GA
My only real option is to go to a 3" body in combination with my suspension lift, but that gives me a problem with my grill guard/winch mount which has to be frame mounted. I can fab and hack, but really don't want to as it appears my bumper would have to be hacked up a good bit.
#48
12-01-2009 | 03:07 PM
Record Breaker
Joined: Jun 2009
Posts: 1,266
Likes: 0
From: SW Ohio
#49
12-01-2009 | 04:52 PM
Moderate User
Joined: Oct 2008
Posts: 17,003
Likes: 19
From: Albany, NY
14in of lift is 6in susp. 3in body, 3.5in rancho quiklift struts 1.5in coil spacer. its only 14 in on the front the back has 9.5 in of lift with 4in blocks, 2.5in add-a-leafs and the 3in body
have never had any problems with the front end other than self inflicted damage from hitting a driveway from the side
have never had any problems with the front end other than self inflicted damage from hitting a driveway from the side
Woah. Spacer on top of spacer on top of extensions...lol Sounds like a radio antenna, the further you pull it out, the easier it is to bend over and kink(break).... Looks good though.
What kind of angle are your cv shafts at?
