When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Does anyone know if I can crank on the stock bolt on the keys to increase the height of the front? I know about the kits that swap out the keys and shocks but was wondering if I could do it with the stock ones. If it were to work I would get new shocks. I was looking at the stock ones and it looks like there is room to do a couple turns on the bolt to raise it up. I have 32.75" tires on there now and want to get up to 35"s. Oh yeah, I have an 03 1500 quad cab 4.7 4x4.
I got a shop to do my old 03 QC 4x4 for about $100. It turned out really well and I got the lift I was looking for. All they did was tighten the torsion bars. Got me 2-2.5"
I got a shop to do my old 03 QC 4x4 for about $100. It turned out really well and I got the lift I was looking for. All they did was tighten the torsion bars. Got me 2-2.5"
You actually PAID someone to get under your truck with a socket and crank the bolts a couple of turns? $100 no less? I must be getting old...
Mullet - do a search, there are a few step by steps on leveling, I know I've posted it a time or two myself. Not sure but check the FAQ section as well.