leveling kit? how hard
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
I don't know that it's any harder on a coil over ram, a little more time consuming to be sure but not that hard to do.
You just have more stuff to go through to get the coils out to install the spacers. Torsion front end guys don't have to mess with the sway bar ends or upper ball joints to get at the keys. But it's really a job that anybody whose even a little familiar with hand tools need not pay to have done...
You just have more stuff to go through to get the coils out to install the spacers. Torsion front end guys don't have to mess with the sway bar ends or upper ball joints to get at the keys. But it's really a job that anybody whose even a little familiar with hand tools need not pay to have done...
Captain
Joined: Feb 2009
Posts: 704
Likes: 0
From: maumelle, Arkansas
its not to hard at all! on my 07 2wd the hardest part was getting the ball joints out of the spindle. The only cost was the kit and a coil spring compressor from oreilys that I rented and then you take it back and they give you your money back so no cost at all.
Record Breaker
Joined: Dec 2009
Posts: 1,262
Likes: 1
From: Ontario Canada
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Trending Topics
Ya ive been wanting to do it for a while. But im debating because im going to put a 6" lift on my truck within the next year but this will just hold me over. Im gettin my lift done for free so ill prob just ask the guy that is goin to do my lift about my level kit.