3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

A few hella problems, help!

Thread Tools
 
Search this Thread
 
Old Jan 28, 2010 | 11:08 PM
  #21  
Shiloh 24's Avatar
Shiloh 24
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

Try swapping the order that the green and yellow are connected, like which tab their connected to. Since your green is a constant 12v it's prolly going through the terminal on the switch that powers the led.
 
Reply
Old Jan 28, 2010 | 11:09 PM
  #22  
NJFF5860's Avatar
NJFF5860
Professional
Joined: Dec 2009
Posts: 248
Likes: 0
From: New Jersey
Default

Nice job...congrads! Looks good!
 
Reply
Old Jan 28, 2010 | 11:21 PM
  #23  
Senomar_DTK's Avatar
Senomar_DTK
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 219
Likes: 0
Default

I just did the wire switch and that fixed the problem

Thanks so for all your help, It made this a lot easier for me!

haha now i can't wait to be somewhere dark or have someone cut me off.....

and thanks NJFF5860
 
Reply
Old Jan 28, 2010 | 11:25 PM
  #24  
DodgeThunder's Avatar
DodgeThunder
Veteran
Joined: Aug 2008
Posts: 498
Likes: 1
From: Langley, B.C. Canada
Default

excellent job man! Looks phucking awesome.. I like seeing stuff like this on the forum where a project progresses from a couple questions at the begginning to pictures when its done.. Good job, and you better mail Shiloh some beer for all the help...
 
Reply
Old Jan 28, 2010 | 11:40 PM
  #25  
Senomar_DTK's Avatar
Senomar_DTK
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 219
Likes: 0
Default

your absolutely right DodgeThunder , haha

I just happy I finally did this and added one more mod to the list
 
Reply
Old Jan 28, 2010 | 11:48 PM
  #26  
Ironsleeve318's Avatar
Ironsleeve318
Professional
Joined: Apr 2009
Posts: 189
Likes: 0
From: Hesperia,CA
Default

You can't run them individually with the instructions that are provided. You must run a different set up to accomplish this. I just have mine tied into the low beam and the switch power on and off. I don't like the idea of having them on with the high beam. Not at all.

The blue wire in one of the first pictures you showed thats coming off off of the light itself I just stripped about an inch and a half and wrapped around the bolt closest to it from the cross member. Just loosened it, wrapped around, then tightened down again.

Really clean install and fairly simple. I have no wiring experience either but this came out really awesome and love my lights.
 
Reply
Old Jan 29, 2010 | 12:19 AM
  #27  
Shiloh 24's Avatar
Shiloh 24
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

I'm just glad I could help, I did mine not too long ago so it was still fresh in my mind. As for the beer I would gladly accept it but just don't get caught as you would be supplying a minor with alcohol. Any help ya need don't hesitate to send me a pm and if I can't help I'll find someone who can help ya.
 
Reply
Old Jan 29, 2010 | 02:40 AM
  #28  
DodgeThunder's Avatar
DodgeThunder
Veteran
Joined: Aug 2008
Posts: 498
Likes: 1
From: Langley, B.C. Canada
Default

lol I thought you were not quite of age yet, thats why I made the joke of him mailin it to ya. Everyones right about this board being full of young guys!!
 
Reply
Old Jan 29, 2010 | 02:47 AM
  #29  
Senomar_DTK's Avatar
Senomar_DTK
Thread Starter
|
Professional
Joined: Jan 2010
Posts: 219
Likes: 0
Default

Haha I'm not 21 until November

and again thanks Shiloh
 

Last edited by Senomar_DTK; Jan 29, 2010 at 02:49 AM.
Reply
Old Jan 29, 2010 | 02:51 AM
  #30  
Shiloh 24's Avatar
Shiloh 24
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

Originally Posted by DodgeThunder
lol I thought you were not quite of age yet, thats why I made the joke of him mailin it to ya. Everyones right about this board being full of young guys!!
Theres prolly good and bad things about there being so many younger guys on here but o well, for the most part we all get along and help each other out. Btw I still got four freakin years before I can drink legally, damn government restricts everything lol. That doesn't say I haven't had a sip or two.
 
Reply




All times are GMT -4. The time now is 11:30 AM.