So today I got my fog/halo lights set up and i can get the fog light to come on no problem. But for some reason the halo doesn't come on? I have two switches for on and off and it just works with the fog light. What can I do to just have the halo on?

 

The halos should have separate wiring. Most people connect the halo's + wire to the parking light which is the center wire in the parking light plug on each side of the truck.

 

i ran my halo wired through the fire wall, and then to my switch, then i spliced into the radio for power, that way if i accidentally leave the switch on they will shut off with the car anyways, are you sure all your wiring is good? i know at first only one of mine would light up and found out the wire came loose somewhere down the line

 

ya check your wiring i had to do mine like ten times to get mine right

 

well i figured out that the right switch works for the fogs and the left one works for the halo's... ive got the fog light down correctly i just have to switch a few things around to the the halos working correctly.

 

glad to hear you got it figured out, what kind of lights did you get

 

http://www.slickcar.com/productdetai...ProductID=6604

these exact ones but I got mine off ebay for just under 80

 

pretty much the same ones i have, im sure its been posted (and sorry to hijack the thread) but anyone have any ideas what the bulb size these are i wanna do hid in mine

 

If its the same as the mopar ones, they're 9006's I do believe.