2007 PCV Valve?
Veteran
Joined: Jan 2007
Posts: 413
Likes: 1
From: Oklahoma City, OK
The PCV valve is not on the filler tube. It's on the passenger side of the motor near the firewall. Yep, NAPA is pretty much clueless about the Hemi. They don't know the displacement or what PCV valve it needs. Not really necessary to change it at 30K, though. They can be cleaned a few times before they need replacement.
Professional
Joined: Mar 2011
Posts: 101
Likes: 0
From: Michigan
You don't need tape it seals with a rubber o ring. Just clean the hole and wipe any crap off the pcv valve o ring. I just put a little engine oil on the ring so it will go in easy and not rip. Should be easy to do. It doesn't really "unscrew" just about a 1/4 turn and it should pull out...same thing to reinstall....just turn it the opposite way 
Last edited by Magnum4406; Jan 8, 2012 at 12:34 AM.
New Member
Joined: May 2012
Posts: 1
Likes: 0
I am new and I will be venturing out to give my Dodge 2007 1500 Ram a tune up and and oil change. I am a bit weary of doing so since it is my first time. Any information you can aide me with, will be very much appreciated.
Registered User
Joined: Mar 2011
Posts: 2
Likes: 0
i found a moroso oil & air separator for my 07 ram hemi but i can't seem to figure out which lines i have to use to install it. moroso didnt include instruction for the ram hemi just the charger 5.7 and 6.1. any ideas?
