Efan Which wire is low?
#31
#32
Ok ok ok.............
If you look closely in this pics you will see the brown and ORANGE being used.
http://public.bay.livefilestore.com/...g/102_1727.jpg
If you look closely in this pics you will see the brown and ORANGE being used.
http://public.bay.livefilestore.com/...g/102_1727.jpg
#37
#38
+1, Because I haven't installed a 180* yet ~_~. And what would happen if you did set it lower than your stock t-stat, would it cause problems with it not engaging and opening ? Kid here still learning the ropes don't hang me
Also if Teach is keeping an eye on this thread. Apparently their controllers aren't the same as the one you got I'm assuming. And was wondering how yours is holding up with the supplied 30A fuse. Because if I need a larger one I'd rather get it now before I do the install this weekend hopefully.
Also if Teach is keeping an eye on this thread. Apparently their controllers aren't the same as the one you got I'm assuming. And was wondering how yours is holding up with the supplied 30A fuse. Because if I need a larger one I'd rather get it now before I do the install this weekend hopefully.
#39
my temp on my controller is set to about 200. I adjusted my temp all the way to the max and started the truck. Then used a temp laser gun to check the temp on the upper rad hose and when it got to 200 I lowered the adjustable switch on the controller until the fan came on. So mine is set somewhere around 200.
#40