I painted my new PML Trans Pan. Heres the pics. will be painting the whole tranny when it comes in. similar to this. the materials i used were:

6 - beers
1 - mad dog 20/20
1 - can of dupli color engine primer
1 - can of dupli color base coat
1 - can of dupli color clear coat
1 - shot of tequila
and 1 - belt sander

i cleaned it all up with a lint free cloth and alcohol, then did 3 coats of primer. 4 thin coats of color, and 3 coats of clear. booze were mixed in between all of that. i painted the whole thing red, then used the belt sander to take the paint off the top of the fins, then clear coated it all







enjot

 

John,
You are a class act. However that looked to me to be a 12 pk job....

 

Now that's quality, good job man.

 

Lookin good buddy, I coulda swore I had already seen this before I checked this thread? Hmmm Dejavu or something.

 

thanks guys. i dont even remember posting this last night. watch out for mad dog.... itll get ya.

 

oh yeah, the paint was Dupli Color Ceramic Engine Enamel. its like $6 a can at NAPA

 

Looks good man.

On a side note MD 20/20 is the nastiest **** ever made.

 

wow. that looks awesome! great job... did you have to use a high temp clear? are you sure you want to paint the whole tranny?

 

Nice job man!

I especially like that you sanded the tops of the fins and didn't paint the bolts. I just did my differential cover, but since I'm only a couple thousand miles into new fluid, I did it on the truck and painted the bolts. When it's diff fluid time again, I'm replacing the bolts with nice allen key jobbers to give it the same chrome on red look...

 

Very nice man, looks better than I thought it would. Not to sure I'd do the whole trans though, may want to check if that'll viod any warranties that come with that trans