Any one here running on these wheels or similar?does anyone know if these wheels will fit a 4x4 2003 ram. any rubbin issues. also looking at putting some 33" nito mud grapplers. My truck is level from the front already.Do i need a lift?

http://cgi.ebay.com/ebaymotors/KMC-X...Q5fAccessories

 

I have those same rims but mine are 24" and i run 305*35*24R and they just bearly rub if i turn the wheel as far as it will turn.

 

those particular wheels in the link wont fit... they are 6x5.5 bolt pattern. yours is 5x5.5 (assuming you have a 1500) if you get 20x9's they will fit with a level and 33's no prob (unless you go crazy wide with the tires)
i think the backspacing and offset is the same on all rockstar/monster wheels for the 1500 ram... I THINK

 

my wheels are 12.5" wide and fit fine with no rubbing unless you turn the wheel all the way and i dont even have a level on the front

 

yeah, mine are 12.5" wide with 35's and i could clear them with just a level... they would just rub a little on the mud flaps

 

You have to get them in 5x5.5 lug pattern, and you'll want them with 4.5" backspacing, I think they also make them with 5-something backspacing. Make sure you get the 4.5"

 

so i can go al the way to a 35" tire and on the wheel width 12.5 it that correct.? remember its a 20" wheel.I really dont want to deal with to rubbing issues.Anyway I think Im gonna go with those wheels i realy like them and maybe the 33" moto mud grap.

thanks for the help

 

35" wont fit on a 12.5" tire without a lift.

 

uhmm not true. lol. It will look stuffed in the wheel well.

 

i have 12.5" wide with 305-35-24 and you really cant go much bigger then that so i do know lol