3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rear Bumper Removal

Thread Tools
 
Search this Thread
 
Old Apr 7, 2010 | 10:59 AM
  #11  
TRXHemi's Avatar
TRXHemi
Thread Starter
|
Record Breaker
Joined: Sep 2008
Posts: 1,676
Likes: 0
From: Damon, TEXAS!
Default

It did not come from the factory, but it is the one the dealer will install aftermarket....prolly some Mopar branded deal that is made by someone else.
 
Reply
Old Apr 7, 2010 | 11:26 AM
  #12  
hondarider525's Avatar
hondarider525
Professional
Joined: Jan 2007
Posts: 185
Likes: 0
Default

when you unscrew those screws, the plug is still connected from the chords in the back. And those did not disconnect from my truck, they were wired and taped together.
 
Reply
Old Apr 7, 2010 | 12:08 PM
  #13  
fk1022's Avatar
fk1022
All Star
Joined: Apr 2009
Posts: 766
Likes: 0
From: Jacksonville, NC
Default

then you'll have to undo/cut the wires then wire it back up when you put it back on
 
Reply
Old Apr 7, 2010 | 12:50 PM
  #14  
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

I could have sworn the plug came out of that trim ring once you had it loose, then it would go back through the hole in the bumper.
 
Reply
Old Apr 7, 2010 | 12:54 PM
  #15  
fk1022's Avatar
fk1022
All Star
Joined: Apr 2009
Posts: 766
Likes: 0
From: Jacksonville, NC
Default

it does, it's hard wired in so it's not a simple plug and play. at least thats what i think he means
 
Reply




All times are GMT -4. The time now is 08:46 PM.