this is why I don't fix these things for a living lol . thanks for the heads up.

 

a gasket didnt come out of mine, so i didnt put one in. just blue rtv. no leaks

 

I didn't have no gasket except for the old RTV I had to scrape off, I just used the red/orange or whatever color it is for my gasket and I don't have any leaks.

 

yeah I was a bit nervous when I saw the orange stock stuff, (Original own. didn't touch it) And I picked up the blue rvt but it's all good . Question how much of that 3rd quart should be used?? I stuck my 1st knuckle and felt oil so I stopped putting it in. I went just over two quarts.

 

thats about right. doesnt really matter how much you put in as long as it fills up to the check hole

 

so i shouldn.t have too top it off so too speak ya think??

 

Ya only wanna fill it to just about an 1/8th inch below the fill hole in the cover.

 

I'm probably acouple ounces short then. I'll top it off tomarrow I guess before more fu7kin rain!!! AAARRRGGGH! shouldn't be a deluge thou lol

 

Mine took exactly 2 RP quart bottles to fill it to the dot.

 

See thats what mine did /However the thing that is bugging me is the 4.5 pints it calls for thats a full half a quart more than what I put in.?! well a little more actually 3.92 gears but idk if that matters.?