Removing orange blinker insert
#11
RE: Removing orange blinker insert
It is very easy to take the inserts out. I haven't done it in a my truck yet.(to lazy) I did do it to a 2000 Stratus. All you do is remove the whole headlight assembly. Take the bulbs out, now very (and I mean very carefully) take a long screw driver and put it into the turn signal hole up against the orange peice. With a hamer tap on the screw driver. Not to hard. The idea is to break the amber piece but not the head light assembly. From there you just pick the pieces out with needle nose pliers. You may need to break the pieces up a little more, the pliers will help with this part. I've tried to take the lense off the head light before. Not a good idea(broke it). Now just for those people that will ask. Once you do this you can NOT put the lense back in, only way to go back is all new head lights. I hope this helps. Any other question just ask.
#12
#13
#14
#15
RE: Removing orange blinker insert
Sorry, typically I'm not quite so quick to throw out the profanities... I just had a fight with the wife, and yeah... Still no excuse. Bottom line is, I *did* do the mod already, and I even took pictures and wrote up a little guide. So I guess I was just a little peeved people can't seem bothered to use the resources already made available.
#16
RE: Removing orange blinker insert
https://dodgeforum.com/m_227638/tm.htm
Here's the link to the write-up Ram05guy.
He's a new member and probably isn't familiar with the site yet. Heck. I'm not sure I know how to use the search function efficiently yet.
Here's the link to the write-up Ram05guy.
He's a new member and probably isn't familiar with the site yet. Heck. I'm not sure I know how to use the search function efficiently yet.