man if you only had a 2500 SFA ... lol j/k

 

i strongly suggest you not buy from TGC. sh!tty customer service, take forever to get parts, and deffinatly dont but theyre stuff. rides like ***, aside from the fact it wont fit on your half ton

 

I have the rough country 6" with the shock upgrade, and my brother has the same truck with the 6" fabtech, and mine rides a lot smoother.

 

I already have the zone 3" body lift and i was checking out their 6" sus. lift. What do you guys think about it? Its reasonably priced and my zone body lift was good. Ok so right now i have a 2.5" leveling kit and a 3" body lift. In order to install the 6" suspension lift you have to remove the 2.5" leveling spacers and install the new ones that come in the 6" sus lift kit. How does the front stay level with the back? Should i stack the 2.5" on it too? Does the zone kit come with everything i need? I dont see any shocks. I read through the directions and it didn't say anything about installing new shocks. Does this kit retain the factory tie rod ends? My leveling kit,struts,shocks,and tie rod ends have less than 1000 miles on them.

 

not all of them have SFA's. but even the IFS on HD's are different than half tons.

 

what HD's have IFS?

 

whats up with the zone 6" suspension lift?

 

4x2 HDs

 

mmstar you need to start a new thread with a bunch of new pics. I havent seen any since your lift. the lights, bumper, wheels/tires all look different.

 

^^^^^ what he said!!