When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
For sure those pins suck I tossed mine in the bin with my ol's as I kept my stuff to put them back in when I drop it which will hopefully be this summer
Well I definitely assembled it back together wrong. LOL! After I took it back apart, I put the pin through the wrong hole in the shackle pack. It was in the hole that was in the back, where the overload spring was removed from. Duhhhh! Oh well... Its all fixed and driving fine now. Not to mention I gained 3/4 inch drop! Once I get the drop shackles installed next week it should sit dead level.
Ryan, that is a one six pack job, not two six pack. Unless you count the one you drink afterwards sitting admiring the job. LoL
if i remove the over load spring how far is it gonna drop the rear? and will i still be able to pull my boat?
Removing the O/L spring will drop about 3/8"-1/2" and without knowing tonge wieght of your trailer I have no idea. I was able to tow my 6x12 enclosed trailer and VTX MC without a problem.