and why a filter on the pcv? could i drill a hole in the intake tube and put the pcv hose in there with no filter?

 

the grommet i used was for a gm dipstick. i cant remember the part number right now. the other tube is a crank case vent tube and you could either run it in the pvc or put a small filter on it. some guys will tell you that you need a vacuum on this line but you don't.

 

yep just a breather tube just get a barbed to threaded adapter cut most of the thread off and glue it to the pvc and surcure the hose with a hose-clamp or zip connector

 

what size PVC is that? Where did you get the adapter?

 

Grommet-GM# 65113
Works pretty good but you may need some sillicone to hold it tighter.