hey i was looking to get some more power out of my 360. i have sc, cold air intake, and exhaust. now im thinking of putting in a cam. im looking for some more power but not super crazy, still want it reliable lol. not sure what cam to go with, any suggestions? thanks

 

do you tow? do you want more bottom end or top end?are you gonna get a custom tune?heads?torque convertor?gears?

so many different choices. you need to call krc performance, hughes engines or comp cams and let them know what you want to do. they will point you in the right direction.

 

ok, i dont really tow. im not sure if i want more top or bottom. id probably go more top end. and for the heads, i would like to get them ported and polished. maybe not right away but in the future.

 

just read my post. i wasnt trying to sound like a jerk, but alot goes in to choosing the right cam. i have been researching mine for about 3 months now. i am doing heads,cam, torque convertor,and gears. i also am adding a supercharger afterwards too.

this is the cam i have choose. it wouldnt be right for you probably. this cam wiil be lacking a little bit till i get the super installed. then after that, look out.lol

http://www.compcams.com/Cam_Specs/Ca...?csid=660&sb=1

 

lol you must have a good job. i would love to do all that, no doubt ha. i might do gears in the future too.

 

look here. the 206 is supposed to be a good cam with no other mods needed. i have read where a couple have installed it and liked it.

http://www.krcperformance.com/ click on engines,then camshafts.

 

i am not buying everything at once. i am gonna just start buying piece by piece till i get it all together. then i am gonna tear it apart. i am not in any hurry. i cannt affoard all that at once either. my truck is going nowhere.

 

you might want to post up in the second gen side. alot more 360 guys there. there are a few guys with different cams in there trucks.

 

im thinking about going with the 210 and getting the sct tuner. then having it programmered. that seems like a pretty safe way to go or i might get the step up and then get the better springs and stuff. and the 1.7 rr.

 

You may want to think about more air intake as well, get a new throttle body, that will support a cam very well.