3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

ram rims

Thread Tools
 
Search this Thread
 
  #11  
Old 07-20-2010, 10:28 PM
That1guy's Avatar
That1guy
That1guy is offline
Veteran
Join Date: Jan 2008
Location: Wv
Posts: 461
Likes: 0
Received 0 Likes on 0 Posts
Default

I know the jeep people run 12.50's on 8 inch wheels. Why is that bad on a truck?
 
  #12  
Old 07-21-2010, 05:48 AM
olyelr's Avatar
olyelr
olyelr is offline
Record Breaker
Join Date: Dec 2008
Location: Elk Rapids, MI
Posts: 2,032
Likes: 0
Received 0 Likes on 0 Posts
Default

In my opinion, an 8" wide wheel is wide enough for a 12.5" wide tire. I have seen WAAAAAYYYYYY too many wheel and tire combos with this setup having absolutely no issues.

And the small rub at the control arm will most likely be fairly minor, and only at nearly full turn. I had this issue on my 2nd gen using the stock 17x8 off road wheels, and all I did was remember to quite turning the wheel a quarter turn before full lock.
 
  #13  
Old 07-21-2010, 05:58 AM
olyelr's Avatar
olyelr
olyelr is offline
Record Breaker
Join Date: Dec 2008
Location: Elk Rapids, MI
Posts: 2,032
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by huseman808
if they are the wheels im thinking of... No, the tire would hit the upper control arm
Originally Posted by huseman808
A level kit wont help you. I have a level kit on mine and was gonna run some 33x12.50x17 tires on the stock rims but there is not enough back spacing on them. I had to order a set of aftermarket rims to be able to run them.

PS
welcome to DF
It sounds to me like you are talking about your wheels contacting your upper A-arm near the ball joint. The OP will not have this issue, as he has a 2500 with a solid axle and control arms.
 
  #14  
Old 07-21-2010, 07:00 AM
HammerZ71's Avatar
HammerZ71
HammerZ71 is offline
Administrator
Dodge Forum Administrator
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes on 19 Posts
Default

Not recommended but you should be fine IF you don't air down to off-road.
 
  #15  
Old 07-21-2010, 10:38 AM
theHemiBeast's Avatar
theHemiBeast
theHemiBeast is offline
Professional
Join Date: Mar 2007
Location: RDU, NC
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by huseman808
AF is right. But even though it is not recommended I did have 33x12.50xr15 on my stock Dakota rims when i had a Dakota, which were only 8 inches wide(as are the Ram rims). i never had a problem though, so i gues it is up to you.

My crager soft 8 rims start at 70$ per rim and come in black silver white and chrome from summit racing. I bought a 17x9 inch rim with a 5.00" backspacing, no issues at all.
huseman808, sent you a PM
 
  #16  
Old 07-21-2010, 06:23 PM
'03 2500 8.0 V10's Avatar
'03 2500 8.0 V10
'03 2500 8.0 V10 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

thank you guys yall have been a huge help. i found some Kelly Attitude M/T for 205 per. they have a 40,000 mile tread warrenty. ive never seen a m/t with a tread life warrenty. this IS good, yes?
 
  #17  
Old 07-21-2010, 09:08 PM
SilverHemiDan's Avatar
SilverHemiDan
SilverHemiDan is offline
Rookie
Join Date: Jun 2010
Location: Harrison Twp,Mi
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default

you will be fine..I ran 315x70x17's for 3 years without any issues on stk.wheels(they would rub the control arms at full lock,only)..no big deal.
then I ran 37x12.5x17's on my truck with the stk(17x8) wheels with no problems,every winter for the last 3 years.

315's on stk. wheels

Name:  100_6230.jpg
Views: 142
Size:  199.0 KB

37's on stk wheels

Name:  100_7552.jpg
Views: 96
Size:  186.9 KB
 
  #18  
Old 07-21-2010, 09:11 PM
SilverHemiDan's Avatar
SilverHemiDan
SilverHemiDan is offline
Rookie
Join Date: Jun 2010
Location: Harrison Twp,Mi
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default

oops,here are the 315x70x17's(34.5") on my stock truck(no lift or level) on stk.wheels

Name:  DCP_2709.jpg
Views: 83
Size:  46.3 KB
 
  #19  
Old 07-24-2010, 10:17 PM
'03 2500 8.0 V10's Avatar
'03 2500 8.0 V10
'03 2500 8.0 V10 is offline
Registered User
Thread Starter
Join Date: Jun 2010
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

beaaautiful truck. so do i HAVE to get a levaling kit to run 35's? or is it just recomended? and i never air down off road here
 
  #20  
Old 07-25-2010, 08:11 AM
SilverHemiDan's Avatar
SilverHemiDan
SilverHemiDan is offline
Rookie
Join Date: Jun 2010
Location: Harrison Twp,Mi
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks,
All I know is I did not need to level the front end.you might have to(or most people recommend it),every truck is a little different.I have the off-road package,which might mean my truck was a little higher than the stk. 2500.
you could also go with a 305 vs 315 tire and have no problems.Every brand of tire is a little different in size(meaning most are not true 35")The only ones that are true 35's are the Toyo's(from my experience)

I buy all my tires from Discount Tire,so if they don't fit,I don't have to buy them.

Good Luck

Dan
 



Quick Reply: ram rims



All times are GMT -4. The time now is 08:00 AM.