Where can I get the small filter in this pic???

 

Not here 5' cost me $10 but you never had any problems with the pvc glue or the silicone coming off i just worried about sucking that stuff in the in take and i think i will build a nother one the glue dried to fast so i could not point the filter down i cant seem to find if anybody has had problems with the home made cai have you ever heard of anybody sucking glue or pvc glue i used red hot

 

I got mine at pep-boys for about $10

 

nah, the grommets I get at Ace Hardware have a slot all the way around the center of them so they stay pretty much on their own, so I only just hit a dab of glue on the outside. As far as the actual PVC, the glue resides pretty much between the two pieces of PVC so even if it flaked off, it'd have nowhere to go.

I've known about guys making these things out of poop pipe ever since throttle bodies replaced carbs and I've not heard of anybody having glue issues yet...

 

Ok just build a new one need to tuck it down in a little bit so here it is i just need to make a brace for it

 

yep, like I said, the grommet I get fits tight enough I'd bet it wouldn't come out, I just use a little ring of cement right around the outside just to be sure.

 

you can break the connection of the pvc if you twist the elbow and pipe oppisate directions then you can re glue the elbow, it does take ALOT of force and it may brake

 

Here it is i like this one better but when just aroun 2500rpm sounds like it flutters a little bit

 

The "flutter" you are hearing in all likelihood is your EGR valve opening and closing, the "Hemi Hat" acts as a baffle to muffle the sound. Normal...

My chrome tube echoes it big time, it's just my Cherry Bomb muffler drowns it out...

 

you need to buy a grommet for your iat sensor i got mine at advance auto for like 4 bucks its a pcv valve grommet fit my bought intake better than the one it came with....