When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
The only thing I've found with the body lifts is that the lift is a uniform 3" meaning there will still be that rake (nose down) look to the front. Might also want to crank the torsion bolts a bit to level it while you are at it...
Hammer do I have to buy the level kit for that or can I just crank my stock ones to level it? and isn't that bad where you will wear out my front end faster?
Any time you put more tension on the torsion bars, you'll stiffen the front end and result in a bit more wear and tear. Despite the claims of level key makers, I've NOT seen where this is any different between cranking the existing keys or installing the leveling keys.
It's all relative and like anything else, in moderation is fine, but don't go trying to get 3" of lift out of a torsion key crank or level. Just a bit 1.5-2" is fine for a nicer, more leveled look and a tad more tire clearance.