Cam Question.
#11
11-23-2010, 09:34 AM
Join Date: Jan 2009
Location: wilton, maine
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
#12
11-23-2010, 11:39 AM
Join Date: Jan 2009
Location: wilton, maine
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
#14
11-23-2010, 05:52 PM
Grand Champion
Join Date: May 2006
Location: Gilbert, Arizona
Posts: 6,041
Likes: 0
Received 0 Likes
on
0 Posts
I think because so many guys over the years have been told and repeated to other what they were told about 03's not being able to be tuned. Although they are restricted on raising or lowering idle, I think everything else can be done. With the cams I tried I never had to raise idle anyway so I never understood why someone else like an 03 be able to run them.
#15
11-23-2010, 06:08 PM
#16
11-23-2010, 07:09 PM
Grand Champion
Join Date: May 2006
Location: Gilbert, Arizona
Posts: 6,041
Likes: 0
Received 0 Likes
on
0 Posts
#17
11-24-2010, 02:57 AM
If I recall, the OP wants to run a cam on the Superchips tune. If thats the case, good luck. For torque grinds you've got your choice of the 260 or sidewinder, and both of those will be hit or miss as far as the 03's are concerned running on a canned tune.
yeah im running a KRC 210 on a 110lsa, but I may have gotten lucky. No two 03 motors seem to be the same as far as ease of tuning goes. for your best bet, you may need to end up going custom tuned. Either way, your pcm still might not accept it. hemi's are extremely finicky towards tuning. Hate to be the debby-downer, but I say it like it is. I got lucky. You might not.
yeah im running a KRC 210 on a 110lsa, but I may have gotten lucky. No two 03 motors seem to be the same as far as ease of tuning goes. for your best bet, you may need to end up going custom tuned. Either way, your pcm still might not accept it. hemi's are extremely finicky towards tuning. Hate to be the debby-downer, but I say it like it is. I got lucky. You might not.
#18
11-24-2010, 06:56 AM
