I ask this before but need help with A/C controls
#1
I ask this before but need help with A/C controls
i replace the 3 bulbs in the controls but they dont lite up i put a test lamp and didn't get anything but the controls still work and the heated mirror and a/c buttons on the side still light up so thats why im confused last time i posted i did not have a pic and i dont think people new what i was talking about
#4
#5
Cold solder joints are common to break loose. When they do you obviously loose the connection. I only suggest this because you have lose power to all three lights and you know they lights are good. Unless you replaced them with LED type bulbs and replaced each one backwards (polarity driven) then you have no power getting to any of them. As for replacing the AC controls, well it is cheaper to live with it as it is. However, if it bothers you that much then I know a guy who can likely get you a replacement for less than $100. PM me if you are still interested.
#7
Trending Topics
#8
If you can identify which solder joints are at fault, you may be able to reflow them using a soldering iron. Just apply the soldering iron tip to the joint until the existing solder re-melts, closing any cracks.
Be careful not to apply too much heat, and be especially careful if adding any additional solder.
Be careful not to apply too much heat, and be especially careful if adding any additional solder.