3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Speedometer broken, abs and park light on

Thread Tools
 
Search this Thread
 
Old May 14, 2011 | 03:02 PM
  #1  
aromanj92's Avatar
aromanj92
Thread Starter
|
Registered User
Joined: May 2011
Posts: 13
Likes: 0
Exclamation Speedometer broken, abs and park light on

so my speedometer is jumping around barely works but if i lay on the gas than it'll start to work or sometimes just jump around. on top of that my abs light and park brake light are always on. i got abs sensor replaced but it didnt do anything. anyone have any help?

also does anyone know an estimate for how much new back vent window is? my brackets that hold it all broke somehow and need of new ones . thanks
 
Reply
Old May 14, 2011 | 08:32 PM
  #2  
cawush33's Avatar
cawush33
Registered User
Joined: Jan 2011
Posts: 19
Likes: 0
From: Montreal, Canada
Default

it can be not the abs sensor, but the wiring ! the speed sensor , abs sensor , tach sensor , i think the fuel meter is on the same wire connector , the thing work in a pulse mode , so just one wire can be connected to all of the gauge and sensor so my first try will be the wire from the speedo and abs , try to follow wire to see if you did not see a cut in the wire ?
 
Reply
Old May 15, 2011 | 01:01 PM
  #3  
aromanj92's Avatar
aromanj92
Thread Starter
|
Registered User
Joined: May 2011
Posts: 13
Likes: 0
Default Actions done

i checked the wire and also got the shop to check the wire they said its hot and its all fine but the speedometer and lights just are not responding. so with that could it be the speed sensor or the shop said something about a pcm or something like that.
 
Reply
Old May 15, 2011 | 01:27 PM
  #4  
atthewmartin114's Avatar
atthewmartin114
Veteran
Joined: Feb 2011
Posts: 425
Likes: 2
From: New york
Default

check how the speed sensor in the transfer case is installed and make sure its plugged in all the way. that one in the transfer case is the start to the abs system.
 
Reply
Old May 15, 2011 | 07:27 PM
  #5  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

Not even close to the right forum!!
 
Reply




All times are GMT -4. The time now is 02:34 AM.