3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Mods for 5.7 Hemi

Thread Tools
 
Search this Thread
 
Old Jul 21, 2005 | 06:00 PM
  #21  
CanynroChris's Avatar
CanynroChris
Joined: Jul 2005
Posts: 15
Likes: 0
From:
Default RE: Mods for 5.7 Hemi

So you CAN put on a turbo on a Hemi in just a weekend. Considering it. Thanks for the thread on this.
 
Reply
Old Jul 21, 2005 | 07:07 PM
  #22  
guitarded's Avatar
guitarded
Joined: Jun 2005
Posts: 35
Likes: 0
From:
Default RE: Mods for 5.7 Hemi

took me around 10 hours altogether by myself in some pretty hot weather. you may experience some stalling and eratic idle, or engine throttling. But that's the pcm adapting to the system.

Also, if you order the sts, be sure to check your sea level elevation so they can provide you with the correct injector for your altitude. Keni Hemi's really good about any questions you may have.

Also, go for the upgrade kit with boost control.....if your gonna invest in the system, might as well go all the way!
 
Reply
Old Jul 21, 2005 | 07:10 PM
  #23  
guitarded's Avatar
guitarded
Joined: Jun 2005
Posts: 35
Likes: 0
From:
Default RE: Mods for 5.7 Hemi

almost forgot...........if you're gonna get the upgrade boost control, grab the air to water intercooler as well. You're gonna need it to run 8-9 lbs boost.
 
Reply
Old Jul 21, 2005 | 07:35 PM
  #24  
guitarded's Avatar
guitarded
Joined: Jun 2005
Posts: 35
Likes: 0
From:
Default RE: Mods for 5.7 Hemi

just out of curiosity, where'd you get your gears hemifever?
is you're front diff 205mm?
 
Reply
Old Jul 22, 2005 | 10:04 AM
  #25  
hemifever's Avatar
hemifever
SPONSOR
20 Year Member
Joined: Jun 2005
Posts: 381
Likes: 0
From: Apex, NC
Default RE: Mods for 5.7 Hemi

guitarded, Yea I've got the 8" front on my '03. I got the gears from someone out of Texas. Air Ram on DTO (he's probably on here too) hooked me up with the dude. Randy's Ring and Pinion was out of stock when I bought last year.
 
Reply




All times are GMT -4. The time now is 10:15 AM.