3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Which RTV to use

Thread Tools
 
Search this Thread
 
  #1  
Old 08-17-2011, 08:03 PM
05220713's Avatar
05220713
05220713 is offline
Amateur
Thread Starter
Join Date: Aug 2010
Location: Pasadena, Md
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Which RTV to use

Ok, first time I am doing this myself. No more overpriced general maintenance from the dealer. I am about to order all the items needed to change out the front and rear differential fluids but my main concern now is which RTV to use. I see some have used the 1 minute gasket maker and others just say apply RTV. I was going to use the Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker. I also checked the Permatex web site and they have a new Permatex Gear Oil RTV Sealant but the Technical Data Sheet says the product dries tack free in two hours and fully cures in 24 hours.

Which one do some of you use and can I fill the differentials back up after 2 hours or do I have to wait longer?
 
  #2  
Old 08-17-2011, 08:39 PM
lxman1's Avatar
lxman1
lxman1 is offline
Site Moderator
Dodge Forum Moderator
Join Date: May 2008
Location: Louisville, Ky
Posts: 9,652
Received 22 Likes on 19 Posts
Default

I personally would just use the standard black RTV myself.
I would wait whatever it says on the package. At least 2hrs.
 

Last edited by lxman1; 08-17-2011 at 08:42 PM.
  #3  
Old 08-17-2011, 08:42 PM
MikeHTally's Avatar
MikeHTally
MikeHTally is offline
Champion
Join Date: Aug 2007
Location: N. Florida
Posts: 4,702
Received 1 Like on 1 Post
Default

I used the red stuff . I noted the date and the miles when I did mine but not the sealant type. Heat isn't a major deal. It gets toasty, but not blazing. I filled the diff about an hour after I put the PML cover on (maybe 90 minutes after applying the "stuff").
 
  #4  
Old 08-17-2011, 10:16 PM
Caseys-dodge's Avatar
Caseys-dodge
Caseys-dodge is offline
Veteran
Join Date: Feb 2010
Location: Houston, TX
Posts: 423
Likes: 0
Received 0 Likes on 0 Posts
Default

An alternative method would be to use gaskets, most auto stores have the rear dif gasket in stock, but I had to order the front one from RockAuto. Neither one has leaked as of yet.
 
  #5  
Old 08-18-2011, 02:06 AM
me0418840987's Avatar
me0418840987
me0418840987 is offline
Veteran
Join Date: Jan 2010
Location: milwaukee WI
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
Default

Permatex Right Stuff 1 minute gasket maker. Just apply and torque tight, NO WAITING. It works great, and saves lots of time, but pricey. Pressurized can cost about $18.00, But it is fast to work with. Seriously, just tighten and refill the diff after about 1-2 minute wait.
 
  #6  
Old 08-21-2011, 08:50 PM
05220713's Avatar
05220713
05220713 is offline
Amateur
Thread Starter
Join Date: Aug 2010
Location: Pasadena, Md
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the responses. Went with the Ultra Black, waitng for two hours was not an issue as is poured down rain here for about that long once I put the front Diff cover back on.

Here are some pictures I took. It was hard to see the C-Clips in the back on due to the way the diff was positioned but from the pictures it appears that are both still in place. Front was a bit difficult just due to the limited space. Everything appears to be fine as this is the first Front & Rear diff change on the vehicle at 47,799.

Next weekend I will be doing the Transfer Case drain and refill. And then a home CAI over the next few weeks.
 

Last edited by 05220713; 12-31-2011 at 02:21 PM.




All times are GMT -4. The time now is 12:49 AM.