3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

are all factory radios satallite ready?

Thread Tools
 
Search this Thread
 
  #1  
Old 10-23-2011, 06:16 PM
marty963's Avatar
marty963
marty963 is offline
Registered User
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default are all factory radios satallite ready?

I have a 2006 ram quad cab 3.7 engine.Was wondering is It was sat ready,or how can you tell.Thanks
 
  #2  
Old 10-24-2011, 07:57 PM
lxman1's Avatar
lxman1
lxman1 is offline
Site Moderator
Dodge Forum Moderator
Join Date: May 2008
Location: Louisville, Ky
Posts: 9,649
Received 21 Likes on 18 Posts
Default

Should be. What are the 3 letters on the bottom. Something like REF?
 
  #3  
Old 10-26-2011, 11:01 PM
marty963's Avatar
marty963
marty963 is offline
Registered User
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

It is still installed so I cant see any leters, but when i cycle thru the modes , it has aux , am and fm.Thanks
 
  #4  
Old 10-28-2011, 06:41 PM
marty963's Avatar
marty963
marty963 is offline
Registered User
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

I see what you mean, yes it has ref by the tuner ****.
 
  #5  
Old 10-29-2011, 06:40 PM
lxman1's Avatar
lxman1
lxman1 is offline
Site Moderator
Dodge Forum Moderator
Join Date: May 2008
Location: Louisville, Ky
Posts: 9,649
Received 21 Likes on 18 Posts
Default

Yep, it will switch between CD and SAT when the "mode" (left) button is pushed when the unit is hooked to the radio.
 

Last edited by lxman1; 10-29-2011 at 06:42 PM.
  #6  
Old 10-30-2011, 12:13 PM
marty963's Avatar
marty963
marty963 is offline
Registered User
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Awsome thanks , curently useing a xm sportster , but would rather have in dash.
 
  #7  
Old 10-30-2011, 05:28 PM
lxman1's Avatar
lxman1
lxman1 is offline
Site Moderator
Dodge Forum Moderator
Join Date: May 2008
Location: Louisville, Ky
Posts: 9,649
Received 21 Likes on 18 Posts
Default

You will have to use an OEM Sirius radio that goes under the dash above the glovebox.
 
  #8  
Old 10-31-2011, 08:17 PM
marty963's Avatar
marty963
marty963 is offline
Registered User
Thread Starter
Join Date: Oct 2011
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

Holly cow , was checking the price on the tunner it might be cheaper to get a third party stereo and sirius tuner.
 
  #9  
Old 10-31-2011, 08:50 PM
zekesocal's Avatar
zekesocal
zekesocal is offline
Registered User
Join Date: Oct 2011
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default What Sirius add-on tuner will work with my RAQ radio in 2004 Durango Limited?

I want to buy the correct Sirius add-on tuner module which best interfaces with the RAQ radio in my 2004 Durango Limited. I presently have a CHYX after-market amp added to the RAQ to permit my XM Inno car kit to go into the radio, but the RAQ will not tune the XM Inno, and the frequency response is not as good as the OEM Sirius system I've heard in other Durango OEM setups.

What is the Sirius tuner module part number, where can it be bought these days, and is an additional wire harness required to add it? What is the part number for the wire harness?

Thank you in advance for answering my questions!
 
  #10  
Old 11-01-2011, 12:23 PM
zekesocal's Avatar
zekesocal
zekesocal is offline
Registered User
Join Date: Oct 2011
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey Marty,

Where did you find the Sirius add-in tuner & harness for the RAQ radio, and what prices were they? I've found various ones out there but cannot find the item on Dodge's website and no traceability of which Sirius tuner module it should be. Any info you have would be greatly appreciated!

Thanks!
 


Quick Reply: are all factory radios satallite ready?



All times are GMT -4. The time now is 01:06 AM.