DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Anyone wanna help me install my coil spacers??

Thread Tools
 
Search this Thread
 
Old Apr 3, 2012 | 01:07 AM
Share
  #1  
Aerogauge's Avatar
Aerogauge
Thread Starter
|
Professional
Joined: Jun 2011
Posts: 160
Likes: 0
Default Anyone wanna help me install my coil spacers??
Cincinnati, Ohio
 
Reply
0
Old Apr 3, 2012 | 05:41 AM
Share
  #2  
big_b_8888's Avatar
big_b_8888
Rookie
Joined: Feb 2008
Posts: 68
Likes: 0
From: Connersville, IN
Default
Front leveling kit ? I live about 45 minutes from you... Did you already buy them? I have the spacers I just took off my 07 because I put a lift on.... They are pretty easy to install.
 
Reply
0
Old Apr 3, 2012 | 01:02 PM
Share
  #3  
Aerogauge's Avatar
Aerogauge
Thread Starter
|
Professional
Joined: Jun 2011
Posts: 160
Likes: 0
Default
Yea just 2.5" front coil spacers, I ordered them today and want to install this weekend
 
Reply
0
Old Apr 3, 2012 | 11:51 PM
Share
  #4  
Aerogauge's Avatar
Aerogauge
Thread Starter
|
Professional
Joined: Jun 2011
Posts: 160
Likes: 0
Default
Don't all jump up at once to volunteer lol
 
Reply
0
Old Apr 4, 2012 | 10:36 AM
Share
  #5  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default
Ill do it but you gotta come to me. You need help as you dont know what to do or dont have the tools or just dont wanna get lonely?
 
Reply
0
Old Apr 4, 2012 | 06:28 PM
Share
  #6  
Aerogauge's Avatar
Aerogauge
Thread Starter
|
Professional
Joined: Jun 2011
Posts: 160
Likes: 0
Default
I need help as in I don't really know what to do, I see a lot of different walkthroughs but they are all different and leave me confused. I have tools and also a little bit because I don't want to be lonely lol!
 
Reply
0
Old Apr 4, 2012 | 08:54 PM
Share
  #7  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default
Well I do think we have a DIY in our FAQs, click the link below in my sig to go there and see if its in there. If not LMK.
 
Reply
0

Trending Topics

Old Apr 4, 2012 | 09:10 PM
Share
  #8  
Aerogauge's Avatar
Aerogauge
Thread Starter
|
Professional
Joined: Jun 2011
Posts: 160
Likes: 0
Default
Yes I have read this DIY:

https://dodgeforum.com/forum/3rd-gen...y-txst8tj.html

But I am confused, this DIY seems to take more steps and also calls for a pitman arm puller where I don't see that on other DIY's. Seems more confusing than it should to me?
 
Reply
0
Old Apr 4, 2012 | 10:51 PM
Share
  #9  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default
I always use a pitman arm puller on mine. Using a hammer to knock out the BJs can possible ruin them if you miss and hit the threads.
 
Reply
0
Old Apr 4, 2012 | 10:59 PM
Share
  #10  
Plainbroke's Avatar
Plainbroke
Veteran
Joined: Aug 2009
Posts: 266
Likes: 0
From: Kansas
Default
Just don't miss and you won't mess up them threads.. ;-)
 
Reply
0



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 03:48 AM.